Skip to main content
Free 20-minute marketing audit
Limited spots available

Have a question?

We usually reply within 5 minutes.

WWhatsApp TTelegram

When Your Best Customer Is Your Biggest Risk: Measuring Customer Concentration in an Uzbek Business

Running or buying a business in Uzbekistan that relies on one big customer? Measure concentration with three formulas, harden the contract and plan 90 days.

When Your Best Customer Is Your Biggest Risk: Measuring Customer Concentration in an Uzbek Business

Half of the revenue comes from one supermarket chain. The chain buys large volumes and pays on time. The plant runs almost entirely for it. Then the chain's buyer calls: payment terms move from 30 to 60 days, and the price drops by 5%.

Can the business say no? Foreign managers running a company in Uzbekistan, and investors looking to buy one, meet this question often. This article shows how to measure customer concentration risk with three simple formulas. You will also get the contract clauses that matter and a 90-day plan to widen the customer base.

The topic is closely tied to crisis management in a business. Many crises start with a single phone call: a large customer leaves or changes the terms overnight.

Why a large customer turns into a risk

A large customer is not a problem in itself. It brings stable volume, credibility and full use of capacity. The trouble is that as its share grows, negotiating power shifts to its side.

That power usually shows up in four ways:

  • Late payment. If the customer pays 30 days later, you finance those days of sales with your own cash.
  • Price pressure. Every year brings new discounts, bonuses, "marketing fees" or return terms.
  • One-sided changes. Packaging, delivery schedules and paperwork all bend to its requirements.
  • Exit. A new buyer arrives or the chain finds a cheaper supplier. You are left with idle capacity and staff.

In Uzbekistan the "one customer" is not always a retail chain. It can be a single distributor, a state buyer in public procurement or one marketplace that carries most of the sales. A platform also sets commissions and rules on its own. This exposure deserves its own line in a business risk management framework.

How to measure the share: three formulas

Concentration means revenue or profit gathered in the hands of a few customers. Measure it with numbers, not instinct. Take the last 12 months of sales broken down by customer. A single month can mislead, because seasonality or one big order distorts the picture.

Also read Investment Incentives in Uzbekistan: Free Economic Zones, Small Industrial Zones and Investment Agreements Business · 9 min

1. Largest customer share = largest customer revenue ÷ total revenue × 100%

2. Top-3 share = revenue of the three largest customers ÷ total revenue × 100%

3. Gross profit share = gross profit from the customer ÷ total gross profit × 100%

The first two are straightforward. The third is often skipped, yet it tells the most. Gross profit here means sales minus cost of goods, discounts, bonuses, returns and delivery costs specific to that customer.

Margins with large customers are usually thinner. So their share of revenue is higher than their share of profit. That leads to two conclusions. If the customer leaves, profit falls more slowly than revenue. But its volume may be carrying the plant, the staff and the fixed costs.

Add a fourth number: the share of receivables. Receivables are what customers owe you and have not yet paid. If one customer holds 70% of all receivables, a single delay from it can freeze the cash flow.

Business owner sorts delivery notes into one tall pile and several small ones

Risk levels: when to act

The thresholds below are a practical guide, not an official standard. They vary by industry and business model. They are enough to get started.

  • Low — Largest customer share: up to 15%; Top-3 share: up to 40%; What to do: Review shares once a year
  • Medium — Largest customer share: 15–30%; Top-3 share: 40–60%; What to do: Strengthen contracts, review quarterly
  • High — Largest customer share: above 30%; Top-3 share: above 60%; What to do: 90-day plan, monthly review, working capital buffer

Use the worse of the two indicators. If a customer's share of profit is even higher than its share of revenue, it earns above-average margins. Losing it would hit profit harder, so treat the risk as one level higher.

In due diligence, ask the target for three documents: revenue and gross profit by customer for at least 12 months, the actual signed contracts with the top accounts, and receivables ageing by customer. Management summaries rarely show concentration as clearly as raw data does.

Illustrative example: a dairy supplier to a retail chain

This is a hypothetical example with numbers chosen for clarity. A small dairy producer has monthly revenue of UZS 800 million. Of that, UZS 440 million comes from one supermarket chain. That is 55%.

Second is a distributor (UZS 96 million, 12%), third a café chain (UZS 64 million, 8%). The top-3 share is 75%. Both indicators point to high risk.

Now look at profit. After bonuses, returns and discounts, the gross margin with the chain is 12%. Gross margin is the part of revenue that remains as gross profit. With other customers it is 25%. The chain leaves UZS 52.8 million of gross profit, the rest UZS 90 million. The chain's share of profit is about 37%.

So the chain brings more than half of revenue but just over a third of profit. The business could survive losing it. Yet half of the plant's capacity would stand idle, and fixed costs would stay the same.

Now price the demands from that phone call. With 30-day terms, the chain always owes roughly one month of deliveries, about UZS 440 million. If terms stretch to 60 days, the debt grows to two months, UZS 880 million. The plant must find another UZS 440 million of working capital, the cash that covers raw materials, wages and running costs.

The 5% price cut costs another UZS 22 million a month. At the same volume, gross profit from the chain falls from UZS 52.8 million to UZS 30.8 million. These two numbers give grounds to refuse, or to ask for other terms in exchange for the concession.

Contract protection: which clauses to include

Contracts with large customers are usually drafted on their template. You cannot change everything, but these points are worth putting on the table:

  1. Payment term — in exact days, with a clear start date: delivery date or signing of documents.
  2. Late payment penalty — a charge for each day of delay. State the rate and its cap. Check any statutory limits with a local lawyer.
  3. Minimum volume — what the customer must take per month or quarter. A "take-or-pay" clause means the customer pays for the agreed volume even if it does not collect it.
  4. Price review formula — if raw material prices or the exchange rate move beyond an agreed percentage, the price is reviewed automatically.
  5. Termination with notice — a notice period of 60–90 days. This buys time to replace volume.
  6. No exclusivity — avoid clauses such as "no sales to other chains". They lock the dependence into the contract.
  7. Advance or guarantee — partial prepayment for new volumes or a bank guarantee.
  8. Cap on bonuses and returns — what percentage of the total retro-bonuses (rebates paid back after the fact based on volume), marketing fees and returns may reach.
  9. Claims procedure — a formal written claim sent before going to court. Set its deadlines and the response procedure.

Contracts with state buyers are usually standard forms with little room to change them. In that case build protection internally: a working capital buffer and a share limit. How to deal with overdue debts is covered in the article on collecting customer debts. Day-to-day control needs a receivables control system.

The 90-day plan: reducing dependence

You will not cut a 55% share down to 30% in 90 days. The plan has a different goal: stop the share from growing, protect the downside and start a flow of new customers.

Days 1–30: measure and protect

  • Calculate shares with the three formulas and update them monthly.
  • Write a "largest customer leaves tomorrow" scenario: how many months you can last and which costs you would cut.
  • Review the contract against the list above and prepare a negotiation plan.
  • Do not tie the relationship to one person. Build contacts in the customer's purchasing, quality and finance teams.

Days 31–60: a flow of new customers

  • List 30–50 potential customers similar to your best current ones.
  • Pick a new segment or channel: another region, HoReCa (hotels, restaurants, cafés), neighbourhood shops or a marketplace.
  • Give the sales manager a separate target: revenue from new customers.

Channels for finding customers are compared in the article on B2B lead generation.

Days 61–90: results and rules

  • Review the first trial orders and the payment discipline of new customers.
  • Adopt an internal rule: if one customer's share exceeds the agreed limit, the owner makes a separate decision.
  • Track the results monthly in one table: shares, number of new customers, revenue from them.

Sometimes the answer is not a new customer but a new product or line of business. Those decisions are covered under business diversification.

Sales representative shows product samples to a neighbourhood shop owner

Checklist: test the business

How many of these are already in place?

  • ☐ Largest customer and top-3 shares calculated for the last 12 months.
  • ☐ Gross profit (margin) share known for each large customer.
  • ☐ Share of receivables tracked monthly.
  • ☐ Contract states payment term, penalty and termination notice clearly.
  • ☐ No exclusivity clauses.
  • ☐ "Largest customer leaves" scenario written and calculated.
  • ☐ A separate sales target exists for new customers.
  • ☐ An internal rule on the share limit has been adopted.

Fewer than three ticks means starting with the first 30-day stage.

Conclusion

A large customer helps a business grow, but as its share rises, decisions slowly move out of your hands. Three numbers reveal the risk: the largest customer share, the top-3 share and the share of gross profit.

Dependence cannot be removed in a day. A clear contract, a working capital buffer and a steady flow of new customers turn it into a managed risk. Start today with one step: open the last 12 months of sales by customer and calculate the shares.

Frequently asked questions

At what level does customer concentration become dangerous?

There is no single standard, but as a practical guide: one customer above 30% of revenue, or the top three above 60%, signals high risk. Measure the share of gross profit as well as revenue, because a large low-margin customer creates a different kind of exposure.

Should a business walk away from its largest customer?

No. The goal is to reduce dependence, not to lose the customer. You keep serving the account, tighten the contract and build a steady flow of new customers alongside it.

Does a marketplace count as a single customer?

Yes, if most sales run through one platform. The platform sets its own commissions, rules and ranking, and can change them at any time. Measure it like one large buyer and plan a second sales channel.

How should a buyer treat concentration in due diligence?

Request revenue and gross profit by customer for at least 12 months, the actual contracts with the top accounts and the receivables ageing by customer. Then reflect the risk in price, deal structure or conditions, for example an earn-out tied to retaining key accounts.

Want to know how exposed the business is to one customer?

We can calculate customer shares by revenue and gross profit for the last 12 months together and calmly work out where to start: the contracts or the 90-day plan.

Assess the exposure together →

Let's work out where to start

Free consultation with a DORA specialist

Message on Telegram

Let's discuss your project

Leave your number and a specialist will get in touch.

Send a request via Telegram

Your details are used only to contact you.