Short answer: foreign companies looking for B2B clients in Uzbekistan usually rely on four channels: industry trade fairs, cold outreach to target companies, professional networks such as LinkedIn, and introductions through local partners. Do not launch them all at once. Pick two based on your average contract size and where your decision-makers actually spend time. Give each templates and weekly numbers, and after three months double down on the one that produced deals.
Strategy, the ideal customer profile and the funnel are covered in the main guide to B2B marketing in Uzbekistan. This article covers steps, texts and timelines per channel.
Choosing a channel: where to start
Answer three questions first:
- What is the average deal worth, and how many years does a client usually stay?
- How many companies are on your target list: 50 or 2,000?
- Where do your local decision-makers spend time: on the factory floor, at trade fairs, in industry Telegram chats?
Then use this table:
- Introductions and partners — Best fit: Almost always, especially for newcomers; Preparation: 1–2 weeks; First meetings: 2–4 weeks; Main risk: Stays random without a system
- Cold outreach — Best fit: Large contracts, limited number of companies; Preparation: 2–3 weeks; First meetings: 3–6 weeks; Main risk: Mass mailing and spam
- Trade fair — Best fit: Equipment, raw materials, construction, food production; Preparation: 6–10 weeks; First meetings: During the fair and the following month; Main risk: A stand with no meetings
- LinkedIn — Best fit: International companies, IT, consulting, export; Preparation: 2–4 weeks; First meetings: 4–8 weeks; Main risk: Local decision-makers may not be there
A rule of thumb for newcomers: trust is the bottleneck, not awareness. Start with warm introductions, and use cold outreach where you have no connection.
The list: work before the first message
Every cold channel starts with a list, built in three tiers:
Also read Customer Database Gone Quiet? How to Win Back Dormant Leads and Lapsed Customers- Tier A, 20–30 companies. A full match with your ideal customer profile and the largest deals. Individual preparation for each.
- Tier B, 50–100 companies. A good match, smaller deals. An industry template plus a personal detail in the first line.
- Tier C, the rest. For now, reach them through expert content and trade fairs.
Sources: company websites and Telegram channels, fair catalogues, industry associations, chambers of commerce, and your clients' suppliers and buyers. For each company, note what it sells, which event could trigger a purchase (a new plant, a branch, a tender) and who decides.
A contact database is personal data. Under Uzbekistan's Law "On Personal Data" (ZRU-547, 2019), processing generally requires the data subject's consent or another basis provided by law. If your CRM is hosted abroad, check the localisation rules too. Since amendments that took effect in March 2026, mandatory in-country storage mainly covers biometric and genetic data and data on telecom operators' subscribers; other personal data may be stored abroad if one of the conditions set out in the law is met, such as an adequate-protection country or approved contractual clauses. Agree on storage and deletion rules with local counsel before you import contacts. Do not use purchased "ready-made databases".

Cold outreach: structure and templates
A cold email is a business letter to one person, not an advertisement. It has five parts:
- Subject line. Short, with the company or industry name. No "offer" or "proposal".
- Reason. Why you are writing to this person: a new plant, a talk at a fair, a mutual contact.
- One problem. Something companies in this industry commonly face and you solve.
- Evidence. What result is possible: an illustrative calculation, or a client example shared with the client's consent.
- A small step. A 15-minute call, a sample or a calculation. Not "let's meet", but a concrete option.
Email 1 (template, send in Russian or Uzbek):
Subject: Welding wire for [Company]'s new workshop
Hello [Name], I heard that [Company] is opening a new workshop in [city]. At this stage procurement usually runs into one problem: wire quality varies from batch to batch and defects go up. [Your company] solves this for [industry] plants with a certificate for every batch and a local buffer stock in Tashkent. Could I prepare a free sample and a price calculation for your workshop? Would you have 15 minutes on Thursday or Friday?
Email 2 (3–4 days later): a short follow-up with one new piece of value.
Email 3 (5–7 days after that): a polite close. "If this is not a priority now, may I write again in three months?"
A follow-up call by a local Russian- or Uzbek-speaking rep works well. Call scripts and objection handling are covered in the guide to sales scripts and objection handling.
Two notes on messengers. First, according to Telegram's documentation, a bot cannot start a conversation with a user; the user has to message the bot first or add it to a group. Bots are for inbound requests, not cold outreach. Second, Article 30 of the Law "On Advertising" (ZRU-776, 2022) allows advertising in the provision of telecommunication services only with the subscriber's prior consent. A presidential resolution reported in July 2026 adds that, from 1 November 2026, promotional SMS require the recipient's written or electronic consent, and promotional calls and messages over mobile networks are banned between 18:00 and 09:00. If you plan bulk SMS or call campaigns, check with local counsel how these rules apply to you.
Illustrative example. You take 60 Tier B companies and write to two roles in each, which gives 120 contacts. At a 15% reply rate you get 18 replies. If a third of them turn into meetings, that is 6 meetings.
Trade fairs: before, during and after
A fair is measured by the meetings it produces afterwards, not by the stand.
6–8 weeks before:
- ☐ The goal is written down: how many meetings.
- ☐ Tier A and B companies are picked from the exhibitor and visitor lists.
- ☐ One main sample or demo for the stand is chosen.
- ☐ A one-pager in Russian and Uzbek and a price calculation template are ready.
2 weeks before:
- ☐ Invitations are sent to target companies, with meetings booked for a specific day and time.
- ☐ A stand rota is set: who staffs the stand, who runs meetings, who interprets.
- ☐ A contact form is agreed: name, role, need, next step, a "warmth" score.
During the fair:
- ☐ Each contact is logged right after the conversation, not in the evening.
- ☐ A 15-minute debrief every evening: how many contacts, how many warm.
- ☐ All contacts go into the CRM the same day.
After, within 48 hours:
- ☐ Every contact gets an email that recalls one detail from the conversation.
- ☐ Warm contacts get an offer of a meeting or a site visit.
- ☐ A cost-and-results table is filled in one week later.
Illustrative calculation. Total fair cost, including travel and the stand, is 60 million soums. You collect 80 contacts, meet 25 of them the following month and close 3 deals by the end of the quarter. Cost per deal: 60 ÷ 3 = 20 million soums. Compare it with your average contract value.
Fair contacts are often lost once the team flies home. Set response rules using the standard from the guide to lead handling.

LinkedIn and professional networks
Before investing time and budget, check two things. First, that the platform works reliably for your local team on their connections and devices. Second, and more important, whether decision-makers at your target companies have profiles and have posted anything in recent months. Check 20 Tier A companies by hand: if few active profiles turn up, keep LinkedIn as a supporting channel.
LinkedIn is usually useful for selling to local offices of international companies, for IT and consulting, and for export-oriented Uzbek companies. For local manufacturers and distributors, Telegram industry chats and personal introductions are often faster.
How to work it:
- Profile. A headline stating who you help with what problem, not your job title.
- List. Mark 15–20 people a week at Tier A and B companies.
- Connection. No pitch in the connection request. One line is enough: "I work in the same industry and follow your posts on [topic]."
- Content. One practical post a week.
- Message. One or two weeks later, a short message following the cold email structure.
Partner and referral scheme
For a foreign company, the warmest lead comes from a local business that already serves your client but does not compete with you. For an equipment supplier, that could be an installation contractor, a design bureau or a spare-parts distributor.
- Adjacent service (installation, design, maintenance) — What they bring: Introductions, brings the client to a meeting; What you give: A referral fee or referrals in return
- Distributor or dealer — What they bring: Regional sales, local stock, local documents; What you give: Margin, marketing materials, training
- Industry consultant or auditor — What they bring: Independent opinion, access to decision-makers; What you give: Transparent terms, work with the client's consent
- Existing client — What they bring: A recommendation and a case study; What you give: Thanks, perks, priority service
Put the scheme in writing: which lead counts as the partner's, where it is registered, how the fee is calculated, when it is paid and how disputes are settled.
Illustrative example. A partner receives 10% of the first annual payment from a client they introduced. With a contract worth 120 million soums a year, the fee is 12 million soums. It is paid after the client's payment arrives, not on signing day. Agree the fee terms, their tax treatment and any cross-border payment issues with your accountant.
Getting referrals from existing clients is covered in the guide to referral programmes.
Measuring channels: a weekly table
Track the same five numbers for every channel:
- Contacts
- Replies
- Meetings
- Proposals
- Deals and value
Make lead source a mandatory CRM field, or in three months nobody will know which channel worked. With ERP and CRM integration, you also see actual client payments per channel.
Self-check: an 8-point checklist
- ☐ Two main channels are chosen and the reason is written down.
- ☐ A target company list with tiers A, B and C exists.
- ☐ Contact database rules, including where data is stored, are agreed with local counsel.
- ☐ A three-step cold email sequence is written in Russian and Uzbek.
- ☐ A trade fair checklist and the 48-hour rule are in place.
- ☐ The partner scheme is written down with five points.
- ☐ Lead source is a mandatory CRM field.
- ☐ The weekly table is updated every Monday.
Conclusion
B2B lead generation in Uzbekistan is disciplined work across two or three channels. Measure it in meetings and deals, not contacts. Take the first step today: write down 20 Tier A companies and note who makes the decision in each.
Frequently asked questions
Which lead generation channel should a foreign company start with in Uzbekistan?
Usually with warm introductions: existing international clients with operations in Uzbekistan, local partners and business associations. Add personal outreach to a list of target companies as the second channel. Plan a trade fair and a formal partner programme once the first two channels are producing meetings.
Does LinkedIn work for B2B sales in Uzbekistan?
It can, but check first whether your target decision-makers have active profiles; many local managers are easier to reach through Telegram, referrals and face-to-face meetings. LinkedIn tends to work best for local offices of international companies, IT, consulting and export-oriented firms.
Can I use a Telegram bot to message prospects first?
No. According to Telegram's documentation, bots cannot start conversations with users; a user must message the bot first or add it to a group. Use a bot to handle inbound requests, not for cold outreach.
Do I need materials in Russian and Uzbek?
Yes, in most cases. In Tashkent business correspondence is often in Russian, while in the regions Uzbek is more common. Prepare cold emails, one-pagers and commercial proposals in both languages, and have a native speaker check them rather than relying on machine translation.
Choosing lead channels for Uzbekistan?
Let's calmly look at your ideal customer, average contract size and local sales capacity, and discuss which two channels to start with and how to measure them.